Skip to content
Matt Hidinger
Hardware

Boat

M35B engine work

Rusty to repainted

Engine room · 10 steps

Step by step

New water heater, alternator, transmission and engine mounts, and the raw water circuit redone, then realigned and a fresh coat of paint.

What went in

Alternator
Balmar XT170 on new pulleys with a Balmar serpentine belt kit
Raw water
New heat exchanger and exhaust elbows, all-bronze JMP pump in place of a steel Sherwood
Fuel
Vacuum gauge on the Racor fuel filter
Water heater
IsoTemp
Transmission
Hurth ZF15MIV V-drive
Also
Corroded rear motor mount replaced, engine realigned, paint

The steps

  1. Before
  2. The old transmission
  3. New transmission, before primer
  4. Painting
  5. New transmission in
  6. The raw water circuit
  7. Balmar XT170 alternator
  8. IsoTemp water heater
  9. Vacuum gauge on the Racor fuel filter
  10. After

Step 01 · Engine room

Before

M35B engine work: Before

Step 02 · Engine room

The old transmission

M35B engine work: The old transmission

Step 03 · Engine room

New transmission, before primer

M35B engine work: New transmission, before primer

Step 04 · Engine room

Painting

M35B engine work: Painting

Step 05 · Engine room

New transmission in

M35B engine work: New transmission in

In the model

Hurth ZF15MIV V-drive

Turns the drive back on itself so the engine can sit further aft with the shaft running under it.

Step 06 · Starboard side of the engine

The raw water circuit

M35B engine work: The raw water circuit
Old and new elbows
Old and new elbows
Strainer
Strainer

The whole raw water side, redone. A new heat exchanger and exhaust elbows, because of all the debris from the engine sitting, and an all-bronze JMP pump in place of the old steel Sherwood.

In the model

JMP raw water pump

All bronze. It replaced a Sherwood pump made of steel.

Heat exchanger

Raw water cools the engine’s coolant here. Replaced, along with the exhaust elbows, because of all the debris from the engine sitting.

Step 07 · Belt end of the engine

Balmar XT170 alternator

M35B engine work: Balmar XT170 alternator

The big one. A high-output Balmar XT170 charges the house bank whenever the engine runs. It runs on new pulleys with a Balmar serpentine belt kit.

In the model

Balmar XT170 alternator

High-output engine charging, controlled by the external Balmar regulator.

Balmar serpentine belt kit

New pulleys and a Balmar serpentine belt, fitted with the XT170 alternator.

Step 08 · Engine space

IsoTemp water heater

M35B engine work: IsoTemp water heater

In the model

IsoTemp water heater

750 W, 4.2 gallons, in the engine space. Heats from shore power, or from engine coolant while motoring.

Step 09 · Engine room

Vacuum gauge on the Racor fuel filter

M35B engine work: Vacuum gauge on the Racor fuel filter

A vacuum gauge added to the Racor fuel filter. Now I know exactly when to change the fuel filters, instead of guessing.

Step 10 · Engine room

After

M35B engine work: After

In the model

M35B diesel

The auxiliary engine, sitting under the cockpit and driving aft through a V-drive.